The Whisper System
By maintaining a radiation angle of less than 90 degrees at all frequencies, Whisper minimizes early reflections and properly shadows the head to preserve stereo information. Whisper provides greater separation in your listening room, up to three times the mere 2 dB of typical high-end speakers. 

Whisper sounds clearer and more detailed for the same reasons digital 5.1 decoders sound more precise than conventional analog logic decoders: steering accuracy. 

Whisper is so low in distortion that it measures as clean as some of the amps that are found driving it. 

Whisper also comes with the StepOne environmental processor so you can dial in the best sound.

The Focus System

Over the last decade this legendary speaker has earned its way into the world’s top studios and the listening rooms of thousands of music lovers.

In fact, the only serious competition to FOCUS begins at more than twice its price. One reviewer proclaimed it “a wonderful loudspeaker that has no competition at its price point” while another stated “You would have to spend $15,000 to get sound in the same league.” 

Not being the type to rest on our laurels, we’ve made a few “minor” improvements. Like increasing the subwoofer motor structure from 24 to 40 pounds and adding the snappiest mid-bass driver around (which just happens to decrease floor bounce colorations and reduce lower midrange distortion by a factor of four). We also designed a new lens for the silk dome to smooth off-axis response and redesigned the ribbon chamber to offer superior damping and extension beyond audibility. 

No other speaker will allow you to experience the rustle of the reed in an alto sax, or the rhythmic drive of a bass guitar the way that FOCUS 20/20 can.

The Harmony 5.1 System

"…perhaps the first truly high-performance in-wall we've ever heard...Its craftsmanship matched its sonic appeal- it was surprisingly deep and dynamic, but very natural sounding through the midrange and highs." Barry Willis - Stereophile, GUIDE to HOME THEATER 

In Harmony with Your Decor 
Designed to appeal to even the most critical eye, Harmony boasts performance rivaling the finest towers. Harmony's unique (patent applied for) mounting method works for both new and existing construction. These enclosures are mechanically decoupled from the wall framing so that acoustic energy is projected into the room, instead of driving you up the wall. 

In Harmony with Your System 
Harmony's driver complement is the best available. The neodymium tweeter is based upon the unit found in Legacy's flagship speaker. The cast frame KEVLITE-Ti midranges deliver exceptional clarity, while the 12" woofer is optimally damped for the enclosure. A custom sub-bass radiator reinforces the lowest octave. 

In Harmony with Your Budget 
While high performance tower designs cost thousands more, Harmony delivers comparable dynamics and imaging while conserving precious floor space. 

"Without a doubt, Legacy's Harmony speakers are the finest in-walls I've ever heard, and they're some of the most beautiful. as well." Darryl Wilinson - Home Theater Magazine, May 2003

The Signature System

“…every once in a blue moon something comes around that redefines every parameter you’ve considered sacred… I went back into my collection of records and tapes and listened to stuff I haven’t listened to in years.…Can a reviewer pay a higher compliment to a piece of equipment? I don’t think so.” Bound For Sound, L.J. Linton 

The Signature III dedicates three 10” carbon-filled bass drivers with a total of 24 pounds of motor structure and a free air resonance of 18 Hz. One woofer is front mounted, one rear mounted and another down-firing At 35 Hz the slot-loaded driver is rolled out, leaving the other two drivers to operate to 120 Hz. A dynamic braking system is included in the subwoofer section to maintain driver linearity at high power levels. A “Q” control is included to allow bass contouring in difficult rooms. 

The mid bass is provided with punch, thanks to an ultra-quick 7” curvilinear polypropylene cone and cast magnesium basket. 

Vocals seem to float from our 7” KEVLAR Hexacone aramid fiber midrange, lending a clarity that is simply unsurpassed. 

A sophisticated 1.25” soft dome with an oversized magnet sweetly details the upper midrange, and naturally, our 4” ribbon tops off the design. 

A specially developed rear-firing 1” Titanium dome is used to enhance treble distribution. 

With dynamics, sound-stage, clarity and imaging unmatched in its price range this speaker will definitely be the Signature of your system.

The Victoria System

Legacy Audio announces availability of a new, limited edition, loudspeaker system, the Victoria LE. This unique design was developed to commemorate twenty successful years in the audio industry, and is the first of a new series of products to be released from the company’s new manufacturing home in Macungie, Pennsylvania. 

Legacy founder and Chief Designer, Bill Dudleston, led the development program for the Victoria LE. The carbon filled midrange is the very same driver as used in the Helix speaker, Legacy’s flagship. The 8” bass driver benefits from a revolutionary new cone material. Silver threads are interwoven with stiff, low mass, graphite fibers. This method of construction avoids the ringing found in metal cones while exhibiting the highest efficiency. A specially designed phase plug and a cast basket complete the design. 

The versatile Victoria LE achieves remarkable dynamics due to a sensitivity that is 6 dB higher than most bookshelf designs. Couple the Victoria LE with matching VS-12 subwoofer and system impact will become earth shattering! Both the Victoria LE and the VS-12 subwoofer system feature 1.5" thick MDF side panels for extreme vibration control. The beautiful cabinetry is worthy of the Legacy hallmark, and is available in a choice of finishes.

The Sconce System

It’s almost incongruous to find this level of performance in a stylish and trim enclosure. Conceived and engineered to fill the broadest range of installation requirements, Sconce is the only logical choice where sonic integrity is paramount. Each component and internal network has been optimized to provide pin point detail and accuracy while retaining efficiency. While most small wall-mount speakers are noticeably compressed and unnatural, Sconce presents a clear and dynamic soundstage. Imaging is incredible! 

Sconce presents a whole new standard for wall-mounted speaker systems. This sophisticated cabinet design is covered in hand selected real wood veneers unlike vinyl clad competitors. A brushed aluminum trim is offered as an option. The mounting system is ingenious providing a solid and secure platform to project sound into the room.